Upgrade Your Outdoor Space with Easy to Install Rubber Flooring for Your Patio

Laying outdoor rubber flooring on a patio can be a great way to improve the look of a space while offering a durable, long-lasting material that is resistant to falls. Rubber flooring is ideal for playgrounds, but it can also be useful for patios, decks, and other outdoor entertaining areas. To guarantee the best results, it is important to prepare the patio in advance and be sure to lay the rubber flooring correctly and with care.

Before beginning the task of laying the rubber flooring, it’s important to prepare the patio area. Depending on the type of material your patio is made from, preparation will vary. For concrete patios, sweep it with a brush and then scrub it down with a cleaning solution. Let it dry, and if it needs to be leveled, lightly spread a concrete filler. If you have a wooden deck, check for loose nails and screws, and hammer down or tighten them to ensure you don’t end up with any bumps in the rubber flooring.

Next, measure the length and width of the patio and decide on the type of rubber flooring. Rubber flooring can typically be found in plank or tile format, and the type you choose can determine how exactly you lay it. If you’re using tile flooring, you’ll need to measure the center of the patio and draw a plus sign shape from it. Set the first four tiles up against the lines and make sure to leave no gaps between them. Lay the remaining tiles in order so that they touch the tiles before them. If you need to fit tiles along the edge, use a utility knife to cut any odd shapes or sizes you may need.

Before you lay the tiles, do a dry run to ensure they fit correctly. When you’re happy with the layout, remove the tiles and number them with chalk. On the patio, mark the corresponding numbers. You may want to lightly wet the area to make sure the adhesive will take and to give it a better finish. Spread whichever type of adhesive you’re using onto the first four tiles and lay them down in place. Continue laying the tiles according to their numbers and cut any further shapes if necessary for the edges.

Rubber flooring can be a durable, long-lasting addition to your patio if it is laid properly. By following these steps, you can be sure you’ll get the best results and a quality finish that will last for many years to come.
Giving your patio a new look with outdoor rubber flooring is a unique and cost-effective way to upgrade the space and add more safety and practicality to it. Rubber flooring provides an ideal surface for those with children who may take a tumble and slip off a swing or other outdoor play structure. While outdoor rubber flooring can be laid in just a few steps, it is important you prepare the patio correctly and understand the installation process of the rubber flooring before you begin.

Since rubber flooring typically comes in plank or tile form, it is essential you first check what you have as this may impact the way the flooring is assembled. You will also want to measure the flooring and patio area to know the exact size you’re working with. Use a chalk line to mark the center of the patio and the four outer corners of the area.

Once the patio has been prepped, you will next want to begin the dry run. This involves laying out the flooring pieces without adhesives in the desired pattern on the ground. This will give you an idea of where each tile should be laid and if there are any cuts that need to be made to fit all the pieces into the right shape. If you are using two different colors, you can arrange them in checkerboard patterns or a fun shape or logo.

Once this is done, take the time to make numbers or other markings on each tile so that you can remember which one goes where. You can then move the pieces off the patio and begin the installation. For added safety, you can use a serrated trowel to apply adhesive to the back of the tiles. Start with the four center pieces and lay them with their edge lines following the plus shape chalked on the patio, and then work your way out until all the tiles are laid.

Cutting pieces is made easy with the use of a utility knife. If you need to make any complex cuts, such as around corners and walls, use a template to help you obtain the right shape and size. Take your time to get the best results and be sure to let the adhesive set before using the patio area.

By making sure the patio is thoroughly prepared and following the instructions included with the flooring, you can easily lay your own outdoor rubber flooring for a safer and more stylish patio space. With the right tools and a bit of patience, you can enjoy the flooring for many years to come.