Unlock the Beauty of Your Home with these Easy Steps to Installing an Exterior Light Fixture Box

Installing an exterior light fixture box is not difficult. With a few tools and materials, you can add or replace a light fixture without the need of a professional’s help. In this article, we will walk you through the steps of installing an exterior light fixture box.

Before beginning, it is important to choose the right place for your light fixture box. It is best to place the light fixture box close to a current lighting fixture, since it is much easier to access the wiring. Use a stud finder and voltage meter to locate both the studs and wires close to the surface. Mark the locations of the studs with chalk. Then using a measuring tape, measure the size of the fixture box, and draw the diameter onto the wall between the marks you made previously.

When working with electricity, safety should always be a priority. Before beginning to the installation, make sure to turn off the power to the area at the circuit breaker inside the main panel. Put on a pair of safety glasses and use the stud finder and voltage meter again to check for any dangerous wires.

Next, use a drill with a hole saw that has slightly larger diameter than the fixture box. Guide the hole saw next to the stud, and apply pressure onto the handle with one hand, and hold the shaft of the drill with the other. Go slowly and stop periodically to monitor the depth. Once you have penetrated the outside of the wall, remove the circular piece you have cut.

Cut the wires inside the wall and strip away the plastic casing. Pull the wire through the opening, and connect it to the cable connector inside the fixture box. Place the fixture box inside the hole, and use screws to securely fix it in place. Cut and remove the insulation from the wire connected to the light fixture, and connect the two wires. Depending on the fixture box, you may need to use brackets to buffered to studs. Once finished, you have successfully installed the exterior light fixture box.

In conclusion, installing an exterior light fixture box is not a difficult task. If you are comfortable working with electrical equipment, you can easily do the job yourself. Make sure to take safety precautions when working with electricity, and always double-check the area to make sure it is safely wired. With these steps, you can now enjoy your new exterior lighting fixture with much ease.