Tips for Installing Bathroom Vanity Lighting for Added Style and Functionality

Installing bathroom vanity lighting can be a great way to add a little extra style and personality to your bathroom. Good bathroom vanity lighting not only looks good, but also serves an important functional purpose, helping you to get ready in the morning. However, installing these lights can be tricky. Here are the steps you need to take in order to correctly and safely install your bathroom vanity lighting.

The first step is to turn off the power to the existing lighting fixture. To do this, you will need to go to the breaker box and switch off the relevant circuit breaker. Once you’ve done this, you can start to remove the existing fixture. To do this, you will need to unscrew the mounting screws that are holding it to the wall. Be sure to keep hold of the screws, as you will need them again to mount the new light.

Once the fixture has been removed, you will be able to see the wiring from the junction box. Make sure that you make a note of the wire colours, as you will need to match these when you install the new fixture. If you find that the new fixture has a different shape or size than the old one, you may need to do some extra work to ensure that the area around the light is even and flush.

Next, you will need to attach your new lighting fixture. To do this, first use a level to draw a line where you want the light to be mounted. You may need to use a mounting strap for larger light fixtures, as this is a requirement of electrical codes. When installing the screws or mounting frame, pay close attention to the instructions in the package to ensure that everything is properly set up. Some fixtures may require that you remove the knockout seal from the fixture base to insert the wires from the wall.

Once the mounting bracket or screws have been secured to the wall, it’s time to wire the fixture. To do this, match the black wire to the black wire and the white wire to the white wire. If the wires don’t have the same colours, refer back to the markings you made when you removed the old fixture. Finally, install the light bulbs and turn on the breaker to test that the new light is working correctly.

Now your bathroom vanity lighting is installed and working correctly. Give yourself a pat on the back and enjoy your new lighting!