Step-by-Step Guide to Ensure Smooth Acrylic Bathtub Alcove Installation
First and foremost, make sure that you have the correct measurements for the bathtub. Take note of the depth, width, and length of the current alcove tub, if it is an alcove. If the tub is not an alcove, then simply take the measurement of the length and width of the area in which the bathtub is to be installed. It’s also a good idea to bring these measurements with you when you go to purchase the tub, to ensure that you get the right size for your bathroom.
In order to ensure that your bathtub does not sustain any scratches or dents during the installation, lay down a blanket or a large cardboard on the floor beneath the tub. This will act as a cushion between the tub and the floor, allowing you to safely lift, slide, and maneuver without damage.
The surface on which the tub is installed should also be flat and level. If this is not the case, you may need to rebuild the floors so that the bathtub will fit properly.
When everything is ready, and you’re preparing to install the bathtub, make sure you follow the manufacturer’s instructions closely. Often, drop-in alcove tubs require special attention and instructions for proper installation, so it’s important to properly follow them.
It is also important to note that the installation process may require more than one person, and that adequate safety precautions should always be taken. Wear gloves and protective eyewear, and never perform any installation tasks with improper tools.
By following these tips for installing an acrylic alcove bathtub, you can ensure not only a successful installation, but a lasting one as well. With your newly installed tub, you’re sure to enjoy many relaxing baths for years to come.