Revamp Your Pool Area with a Crafty Indoor Outdoor Carpet Installation

It is easy to install indoor outdoor carpet around your pool but you need to make sure that you do it correctly. If you decide to install this type of carpet, make sure that you have accurate measurements and a clear idea of what your finished product will look like. When you have all of that ready, you can move forward with the installation.

Before you begin installation, you will need to purchase the proper outdoor carpet adhesive and the right indoor outdoor carpet for the job. Outdoor carpet usually comes in 6 and 12-foot widths and you need to know the lineal footage of your area to order the right size. Most places do not carry this type of carpet in stock, so you should plan ahead and order what you need.

Once your materials are ready, you will need to make sure that the subfloor is clean and free of debris. If the area is not level, use floor patch to even it out. Then, spread out the carpet adhesive with a trowel. Outdoor carpet adhesive is usually almost thick and heavier than the usual carpet glue, so make sure you spread enough for the area you are covering.

Next, lay the carpet down into the adhesive. Make sure that the carpet is firmly pressed into the glue and use a roller if necessary. If you need to make a seam, use a straightedge to cut the two edges and make sure that they are even. After the carpet is down, you may want to use rubber transitions to the edge to keep it in place. This will help keep the carpet from coming up and make your pool area safer.

Once the carpet is down and secured, you can remove any excess adhesive and enjoy your new pool area. To keep your pool carpet looking good, make sure to vacuum it on a regular basis, spot clean spills and stains as soon as you can, and keep it free from debris. With the right amount of care, your indoor outdoor carpeted pool area should last for years.