Oil Grease Be Gone: Master Pressure Washer Detergent Injector Use with These 3 Tips

Using a pressure washer detergent injector can be a great way to deep clean any exterior, but it is important to use it safely and effectively. To make sure that things are done properly, here are three tips to keep in mind when using a pressure washer detergent injector.

First, it is important to use the right amount of pressure when spraying chemical cleaner. Too much pressure will cause the solution to splash off, and therefore, it is best to use low pressure for applying the detergent. The wand will allow for switching from low to high pressure when necessary.

Second, practicing safety is essential when working with a pressure washer and an especially important step when working with chemicals or detergents. Wear gloves, protective clothing and goggles to protect your skin and eyes.

Finally, when dealing with a dirtier area, it is best to begin at the top of the surface and work your way down. Make sure to pay special attention to the corners and any cracks. Utilizing a knapsack sprayer and applying your detergent to a dry area is best. A 45-degree jet angle and a pressure setting around 500 psi or 35 bars are optimal for the solution to spread evenly.

In summary, there are several important things to know when using a pressure washer detergent injector. Remember to always use low pressure when applying the detergent, wear protective clothing, and start at the top of the surface when dealing with dirtier surfaces. These tips will help ensure that you are using your pressure washer detergent injector correctly and safely.