Master the Art of Home Cooking with a DIY Electric Oven Installation

Share

Installing an electric oven into your home can be a daunting task due to the electrical codes and wiring involved. However, you can save time and money by doing it yourself. With some home improvement knowledge and the steps outlined below, you can professionally install your new electric oven in no time.

Before you begin, it is important to research your local electrical codes to ensure your oven and wiring project is permitted. Then make sure your main electric panel is functioning properly. To install your electric oven properly, it must run on an individual powered circuit.

First, you must find a junction box to connect your new oven’s wiring to the house’s power. To prevent the risk of injury, deactivate the circuit your oven will occupy before installation.

Master the Art of Home Cooking with a DIY Electric Oven Installation

Next, choose where to place the oven. Wall-mounted ovens should be set close to their final position but with enough cable length for you to be able to connect the wiring securely. For a freestanding oven, move it in place enough that you can access the wiring from the back with no strain.

Master the Art of Home Cooking with a DIY Electric Oven Installation

After this, remove the covers from the access holes of the junction box. Fit the wires with the appropriate cable connectors. Then, remove about ⅜” to ½” of the insulation from each of the four wires running through the large sheath.

Be sure to take caution as improper connections can cause fire or a short circuit. Make sure to use the right sized wire connectors to guarantee a solid and safe connection. Match the wires by connecting the white wire from the oven to the corresponding white wire from the power source, run a ground on the green and copper lead from the oven, the red wire from the oven to the power source, and the black wire to its source. Secure the connections with a small screw.

Master the Art of Home Cooking with a DIY Electric Oven Installation

Now, put the junction box’s covers on, activate the circuit breaker, and turn on your electric oven to make sure it is functioning properly. If the oven is standalone, move it into its appropriate place. And that’s it! With that, your electric oven is now successfully installed.

Safety always comes first when handling electrical items, so always follow the instructions carefully and double check all connections to ensure they are tight. If you are ever unsure or overwhelmed, it is best to seek help from a licensed electrician. With proper research and a bit of knowledge and effort, you can easily install a electric oven and enjoy the benefits of cooking with this appliance.

  • December 7, 2021