Learn the Basics of Installing Aftermarket Exhaust Pipes for Your Motorcycle

Share

Begin by pre-fitting the custom exhaust onto the bike to make sure it will fit perfectly around other parts of the motorcycle. Consider the location of the new pipes, ensuring they don’t block off any oil pans or other vital components. As a suggestion, you can fit the exhaust around the clutch. Once you know the exhaust fits right, use a wrench to loosen the bolts and detach the muffler and its components. This will also help to reduce the weight suspended off the bike.

Learn the Basics of Installing Aftermarket Exhaust Pipes for Your Motorcycle

Next, pay attention to the clearance around the bike. Make sure that the exhaust doesn’t touch the seat frame, tires, or wire harness. Many bikers commonly experience a lot of heat from under seat exhausts, so it’s important to install the new pipe accordingly. When you are ready to start the installation, use a lubricant if it’s hard to remove the old exhaust. Disconnect the head pipes from the motorcycles and take off the old exhaust gasket. Then, take a few moments to look over the area for any defects, nicks, and repairable issues.

Learn the Basics of Installing Aftermarket Exhaust Pipes for Your Motorcycle

Learn the Basics of Installing Aftermarket Exhaust Pipes for Your Motorcycle

Now, look over the installation diagram sent with your new pipes. Lay out all the attachment parts onto a table and make sure it has plenty of light. Size up the parts onto your frame and install the exhaust onto the bike to make sure it fits. When the time is right, insert the gasket and head pipes into place and start to tighten the attachments.

Finally, once you have the exhaust in place, make sure to tighten the head bolts to secure the pipes onto the frame. It is essential to double check all the bolts and ensure that it is properly secured. That said, when you’re all done, fire up your motorcycle to make sure it’s all running smoothly. Pay attention to the sound and smell, as this could signify a potential problem.

Installing custom motorcycle exhaust pipes takes some time and preparation, but it is worth the effort in the end. With a comprehensive guide such as this as well as the right tools and resources, installing custom pipes becomes much easier. So take your time and make sure that the job is done properly – you’ll be glad you did.

  • December 2, 2020