Learn How to Easily Uninstall Inside Mount Blinds in Just a Few Simple Steps

Pull up the blinds up all the way and lock it in place before you detach anything else. This ensures that the blinds won’t be bent or damaged when you remove them. You can unlock the valence by pressing down the bottom part and making a small gap between it and the top part of the clips. Gently pull it out at an angle, being careful to not yank it out and damage the clips.

The brackets located at the bottom of the window hold the blinds in place, remove the pins using a screwdriver if needed. If the brackets are screwed in too tightly, use a pair of pliers to loosen them before taking them out. Do it firmly but without damaging the wall.

After removing the pins, you need to gently slide the blinds out of the frame, enlist some help if they are wide and heavy. Dropping your blinds can cause damage to the blinds or the floor, so make sure to be careful while taking them down.

Remove the extra brackets located in the sides and center of the frame, which you can do with a screwdriver. If you have wall anchors to mount your blinds, remove them using pliers. To get the wall prepared for reinstalling the blinds, use joint compound to patch the holes left by the anchors. Sand down the surface once it has dried for a smooth finish, if you need to paint over it, do so.

After uninstalling, store your blinds properly if you plan on using them again. Make sure to clean them with a damp cloth and store them in a cool and moisture-free environment. This ensures that your blinds won’t be damaged while they are in storage and they’re ready to be reinstalled when needed.

Uninstalling inside mount blinds is easy and you can do it yourself with the right tools. Just be careful to not damage the walls during the process or your blinds while taking them down or while they’re in storage. With the right preparation and care, your blinds will be ready to be reinstalled in no time.