Keep Those Rascally Rodents at Bay: Learn How to Build a Multi-Catch Rat Trap!

Making a multi-catch rat trap is an effective way to protect your home and property from infestation. Rats carry a number of diseases, and can cause considerable economic damage. Rather than using traditional poison solutions, you can use a multi-catch rat trap both to trap and destroy rats so that their bodies can be disposed of properly. Constructing your own trap is easy and economical, and it can save you from the mess and health risks posed by poison solutions.

To begin your multi-catch rat trap, first insert a ½ inch drill bit into your drill. Use the drill to create two holes in your 5-gallon plastic bucket, just above the handle hinges. Slide a 14-inch piece of ½ inch dowel through one of the holes, then rest the other end of the dowel inside the bucket.

Next, use an empty soda can for your trap. Position the can on a flat surface, with the opening facing downward. Use your hammer and ¾ inch steel punch to make a hole in the bottom of the can. Position the steel punch in the center of the bottom, then hammer it through the metal. Slide the dowel through the hole in the pop can and reinsert it through the other hole in the bucket. Position the can in the middle of the dowel and spin it to secure.

Now, insert a tube of adhesive into your caulking gun. Apply a bead of adhesive along one side of the 24-inch long 2×4 board. Stick your carpet to the board. The carpets should measure 4 inches by 24 inches, and the shag should be facing upward. Position the board with one end against the bucket rim, and the other resting on the floor. Make sure the carpet is facing upward.

With the trap almost assembled, use your knife to cover the pop can with peanut butter. This will lure the rats onto the trap. Then, fill your bucket with 2 gallons of water. Once your trap is in place, rats will climb up the bridge and onto the dowel to get the peanut butter. The can spins around, and the rat falls in the water. Check on the trap periodically, and dispose of the rat’s body safely when it is full.

With a few simple steps, you can make a multi-catch rat trap that is effective and economical. Be sure to take precautions when using power tools and make sure to wear protective gear. Keep tools away from the reach of small children, and remember to dispose of dead rat bodies in a safe way. With the right technique and materials, you can make a multi-catch rat trap to keep your home, property and family safe and secure.
Building a multi-catch rat trap is a great way to rid your home or business of troublesome pests, while being much more humane than traditional poison solutions. Rats can spread disease and bacteria, so it is important to get rid of them promptly and correctly. Constructing your own multi-catch trap is surprisingly easy and accessible, provided you have the right tools and supplies.

The first step is to gather the necessary supplies. You will need a 5-gallon plastic bucket, a ½ inch drill bit, a 14-inch piece of ½ inch dowel, an empty soda can, a ¾ inch steel punch, a hammer, a 24 inch long 2×4, a tube of adhesive, a 4 inch by 24 inch piece of carpet, a caulking gun, a knife and about 2 gallons of water. To get a better grip on the power tools, it is important that you wear appropriate protective equipment such as gloves and goggles.

Once you have all of your supplies, it is time to begin construction. Put the drill bit in the drill and use it to create two holes in the 5-gallon plastic bucket in the area just above the handle hinges. Slide the 14-inch piece of dowel through one of the holes. Position the soda can so that the opening faces downward and use the steel punch and hammer to make a hole on the bottom. Slide the end of the dowel through the hole in the can and the other hole in the bucket. Spin the can on the dowel, so that it is centered in the middle.

Next, use the knife to spread peanut butter over the can. This will act as bait and attract the rats. Insert the tube of adhesive into the caulking gun and apply a bead of it along the 24-inch long 2×4. Stick the carpet, shag facing outward, to the board. Position the carpet board so that one end is resting on the floor and the other on the bucket rim.

To finish the multi-catch rat trap, fill the bucket with 2 gallons of water and place it in a spot where there has been evidence of rat activity. The rats will climb up the bridge and onto the dowel to get the peanut butter and when they do, the can will spin and they will fall in the water. Check on the trap periodically and when you have caught your rats, remember to dispose of them properly. With a little patience and the right supplies, you can successfully build your own multi-catch rat trap, get rid of the pests and keep the environment safe.