Installing Wall Paneling in Your Bathroom: A Step-by-Step Guide

Installing bathroom wall paneling is a great way to spruce up your bathroom and is simpler than you might think. It can be put up quickly, it keeps moisture away from the walls and with the right preparation and planning you can have your bathroom looking fresh and modern in no time. Here, then, is a guide to all you need to do to fit bathroom wall panels correctly.

First, measure the wall or walls that you plan to cover. Knowing this measurement will tell you how much bathroom wall paneling to buy. It’s always best to buy a little more than you need; this will cover for any mistakes during installation and ensure you don’t run out of materials before finishing the job.

Second, locate the studs on the wall. Studs are typically 16 or 24 inches apart, and a stud finder is the best tool for this job. Once the studs are found, you can start to calculate the width of the panels. As two panels will abut on each stud, measuring the distance on a panel correctly is essential. Measure twice and draw the line, then cut with a saw.

Third, attach the panels to the wall. This is usually done with screws; pre-drill 2-3 holes on each side of the panel and then drive in the screws, ensuring they are 12 inches apart, then holding the panel in place. Then, fit the next panel butted up against the first, before drilling and screwing into place in the same way. Continue until you have covered every wall in turn.

Fourth, fill any screw heads with spackle and smooth down on the wall panel. The gaps between these panels can also be filled in using drywall tape, just run it along each gap and smooth it down to create an even surface that lines up with the panels.

Finally, cut top and bottom trims to size and attach to the wall panels using thin tack nails. Once the installation is complete, paint or stain the bathroom wall paneling in your desired color and you’re done!

Installing bathroom wall paneling is a relatively straightforward process; all it requires is some preparation, patience and good DIY skills. Once you’ve got the right materials and you’ve measured up correctly, it should take no more than a couple of hours to complete the job. With bathroom wall paneling up, it’s also easy to decorate – so get creative and spruce up your bathroom in style.