Install a New Sidelight – Step-by-Step Guide for Replacing Window Casing

Replacing casing around a sidelight window can be an easy job, especially if the the old casing has been measured correctly and is easy to remove. Casing, which is the external structure around a window, serves the purpose of not just lending an aesthetic appeal to the house, but also helps keep out unpleasant weather, bugs, and critters.

When replacing a sidelight window casing, there should be no issues, as long as the old one was accounted for and measurements have been taken beforehand. To begin, use a screwdriver to remove all of the nails and other fixtures, and then pull out the casing from the wall with the help of a claw hammer. If necessary, cut a part around the casing with a saw and miter the end of the pieces, making sure to have a good corner. Add a layer of caulk around the edge and then reinstall the pieces securely into place.

The key to a successful and easy job is to measure everything accurately and in accordance with the guidelines. Using an electric saw very carefully can be done, especially when it comes to sidelight windows, as this job often requires intricate shapes with the miter. Generally, beginners should avoid electric saws and opt for manual ones, as they are often much less intimidating.

Once the pieces are reattached, secured, and caulked properly, reinstall the screws and put back anything in the window frame to secure it. You will want to make sure that the window frame is inserted to the exact same depth as before, and if not, you may want to readjust the screws in order to make sure that the window placement is secure.

Inspecting and replacing the casing around a sidelight window can be an easy job if it is done correctly and you take your time. By making one small mistake, you could easily have to take the whole edge off and start again. Measure the pieces accurately and make sure that nothing is damaged, and the job will be done in no time.