How to Remove Small Dents Quickly and Easily Using a Suction Style Car Dent Puller
Using a suction cup style car dent puller is a great way to remove small dents on your car without having to pay for a trip to the body shop. These devices have a simple design and are fairly easy to use. Here is a step by step guide on how to use a suction cup style car dent puller.
First, make sure to thoroughly clean the area surrounding the dented part of the car. This will prevent any dirt or debris from getting stuck in the suction cup when it is applied. Use a quality car cleaner and wipe the area clean, making sure to rinse the suction cup off before you attach it.
Next, attach the suction cup to the body panel of your car. You will need to apply firm, yet gentle, pressure to the suction cup in order to make sure that it creates a strong vacuum with the body panel. Depending on the type of car dent puller you have, you may need to either squeeze two handles together or press down on a pump in order to create adequate suction.
Once the suction cup is firmly attached, you can start to pull the dent. Pull firmly, but don’t pull too hard, otherwise you might possibly cause more damage than you started with. When pulling the dent, make sure to focus your pressure evenly across the entire area to get the most effective results.
When the dent is almost completely removed, you may need to switch to gently pushing the area inwards. Make sure not to force the area too much, as this can cause even more damage.
If you’re using a car dent puller with two handles or rods, you may need to create further tension on the dent. This can be done by tightening the screw located between the two handles. This will increase the amount of force being applied to the area, helping to remove the last remnants of the dent.
Once you’ve removed the dent, be sure to inspect the area closely. Make sure that no further damage has been done and, if necessary, use spot putty and car paint to properly finish repairing the area.
Using a suction cup style car dent puller can be a great, cost-effective way to remove smaller dents on your car. Although it takes some time, practice, and effort to get it right, it can save you a lot of money in the long run, as well as avoiding potential damage from taking your car to a body shop. Follow the steps provided above and you should be dent free in no time.