How to Easily Install Natural Stone Veneer to Give Your Shower a Fresh Upgrade

Now you are ready to apply sealer to your stone veneer shower. Before sealing, the stone must be completely dry. This can take up to three weeks. Check the stone to see if it is dry. If it is, it is time to apply sealer.

First, purchase a natural stone sealer which contains a urethane or silicon base. After purchasing, make sure to read the instructions carefully. Adjust the dilution rate according to the sealer’s instructions. Natural stone sealers are usually very strong, and too much sealer can damage the stone.

In order to apply the sealer, use a mop, roller, or brush. Dip the brush, mop, or roller into the diluted sealer. Working from the top to bottom, start applying the sealer onto the stone veneer. Do not drench the stone in the sealer, apply the sealer lightly. Depending on the sealer, it may require two or three coats. Wait for one hour after applying each coat before applying another coat.

Now that the natural stone veneer is installed and sealed in the shower, it is time to enjoy it. Natural stone veneers are great for adding both beauty and value to your home. They also require minimal maintenance and cleaning, a damp cloth and mild detergent usually do the trick.

Installing natural stone veneer in a shower is a great choice, as it provides both style and affordability. The installation process is easy and can be completed in just a few steps. With a little bit of effort, you can transform your dull and boring shower into a beautiful one that gives your home a touch of elegance.