Get Your Home Ready for Cold Weather: A Step-by-Step Guide to Installing Foam Pipe Insulation

Installing foam pipe insulation is a relatively inexpensive and straightforward task, and it can save you money on energy bills. Not only does it help to conserve energy, but it also helps to protect the pipes from the cold and the sweat, helping to prevent premature erosion and pipe bursts. In this guide, you’ll learn how to install foam pipe insulation yourself, so you can avoid expensive emergencycall repairs.

Before you begin the installation, it’s important to make sure the pipes are clean and free of dust and debris. Use any cleaner that you have in the kitchen and wipe it off with a rag. Make sure that it is completely dry before attempting to install the insulation.

Once the pipes are prepped, measure the section of pipe you’d like to insulate and cut the foam pipe insulation to the correct size. Most of the time, the foam pipe insulation will come in a tube shaped like a child’s swimming noodle, with one open side that has a strong layer of self-stick adhesive. This adhesive should be enough to adhere the insulation to the pipe.

Place the foam insulation around the pipe, making sure it covers all areas, including joints and elbows. Use your fingers to press it into place and encase the pipe. Use the duct tape to seal the insulation closed, so it won’t come out, and press the ends of the insulation together.

Once the pipe is filled, you can admire your work! You just saved yourself the expense of emergency call bills as well as protecting your pipes and conserving energy! Make sure to purchase your foam pipe insulation on trusted sites, such as Amazon.

Hopefully, this guide has helped you successfully install your foam pipe insulation – it may take a bit of time, but the job can be done with relative ease, and it will be well worth it in the end.