Get Ready to Refresh Your Bathroom: A Step-by-step Guide to Installing Base Cabinets

Installing a bathroom base cabinet is not a difficult task. With a few basic tools and a little bit of knowledge, you can easily do this. The first step is to measure the floor space available for the cabinets. Measure the height, width, and depth of the area, and make sure to make a sketch of where the cabinets will be placed. Once that’s done, use a stud finder to locate the position of the wall studs and make marks to indicate the centre of the studs.

Next, you can purchase bathroom base cabinets and all the necessary hardware for installation. Once you have all the items you need, make sure to sand and finish the cabinets before mounting them. This will give them a smooth and polished look. Then use a level and tape measure to mark the positions of the supports, followed by securing them with nails and a hammer. Make sure that the cabinet is well-balanced from front to back and from side to side. Use shims if necessary to adjust it in its place. Then attach the cabinets to the wall studs with screws.

After this, it’s time to take care of the countertop. Install the sink and faucet set, then you can place the countertop over the cupboard top. Finally, mount the base cabinet doors with hinges that fit onto the cabinets, and attach the handles securely. Make sure to check if the doors are working properly.

You’ve now successfully installed your bathroom base cabinets. With regular maintenance and care, these cabinets can last for many years and adds a modern feel to your bathroom.