Get Helpful Tips for Preserving the Longevity of Your Pool Deck Paver Lights
Aside from monthly which helps your pool deck paver lights maintain their aesthetic glow and beauty, you must also do regular cleaning. During dry and hot days, paver lights will easily accumulate dust. Turn on your pool deck lights every so often and clean the dust that has accumulated if there are any. It would also be helpful to have a damp cloth prepared in case dirt is unusually piled up.
You should also inspect your paver lights from time to time. Check for any deformities that could be caused by extreme weather as well as any bug infestations. These should be taken into consideration when doing your monthly cleaning. After squashing bugs, ants and other insects, you must wipe away their remains so that the debris won’t accumulate and block the light.
Another way to keep paver lights on your pool deck well maintained is to give them a deep clean. In the event of deep cleaning, disassemble the paver lights, if you can. This will give you access to the nitty-gritty corners and edges. Using a soft brush, clean off any dirt and debris that have accumulated inside the paver light and its frame. Be sure to do a thorough job.
Finally, if you wish to keep your pool deck paver lights in pristine condition, it is recommended that you use silicone caulking a few times a year. You can apply a sealant over the paver lights and its framing. This will protect against water damage, dirt build-up, and other elements that may damage or easily rust your pool deck paver lights.
Maintaining the paver lights in your pool deck is an important chore. Not only does it ensure that you get the desired lighting for when you are relaxing in your pool, but it also keeps your pool deck looking perfect and in pristine condition. Ensure that you clean, inspect, and caulk your paver lights from time to time and enjoy their lighting effects and beauty all while keeping your pool deck looking its best.
Having an illuminated backyard of your pool is not only visually pleasing, but also serves as a safety precaution. Pool deck paver lights can help increase visibility of your pool in darkness and make your outdoor area more inviting and enjoyable. However, just like any outdoor elements, it is important to maintain the lights to keep them in good working condition. Here’s a guide on how to maintain pool deck paver lights.
Before getting started, check the wiring and plugs. Make sure plugs are properly connected and no visible damage has occurred. Overtime, due to wear and tear, plugs may get loose and needs to be replaced. It is important to also check for any visible cracks in glass housing as these may be a cause of water leakage.
Cleaning of the glass housing is necessary to avoid dust accumulation which will dull your lights. Use a glass cleaner to wipe down the glass. A small paintbrush is ideal for reaching the hard to reach areas. Once cleaned and dried, replace the glass cover securely.
It is also important to clean the light fixtures and bulbs. Depending on the type of light bulb, use a soft cloth dampened with water or isopropyl alcohol. Installing a protective bulb cover will help in preventing dirt build up and will make it easier to clean in the future.
Use a soft brush or a vacuum cleaner to clean out dirt, leaves, or any dust build up in between pavers. If necessary, wash the pavers with a pressure washer to remove any chemical residing on the paver.
Once all the cleaning is done, there is a need to check and make sure that your lights turn on. Verify that the switches are connected and working properly. Also set the timer to make sure the lights turn on and off automatically every day.
By following this simple guide, you can help ensure that your pool deck paver lights remain in good condition for a long time. Maintaining the lights not only extends their life but also improves the beauty and visibility of your outdoor area at night.