DIY Project: Create a Sturdy, Eye-Catching Pillar for Your Driveway Entrance

Constructing a pillar for your driveway is no small feat. The process requires patience and time, however, it is not a difficult undertaking. To make a pillar for your driveway, you will need some basic DIY supplies such as concrete, bricks and mortar, as well as a few tools like a trowel and a level.

Begin by pouring some concrete onto the ground. Use a shovel to move the cement from the wheelbarrow to your work area. Once the concrete is in place, form it into an L-shape and then use a trowel to make it smooth. Place a steel bar into the cement in the L-position, making sure the long end is sticking up out of the surface. Allow the base to set for 1 to 2 days. This will help to stabilize the pillar in the long-term.

After that, start laying bricks to form the pillar itself. Use a on a trowel to apply mortar between each brick, then use a level to check the alignment of each row as you create it. Once you have a layer of bricks in place, fill the gaps between the bricks and the steel bar with concrete. It is important to note that this concrete is filling the space to provide additional support to the pillar. Once the concrete is in place, continue making layers of bricks around the structure, filling in any gaps with mortar.

If you reach the desired height of the pillar, let the structure dry for 1 to 2 days. Allow the concrete and the mortar to completely dry, as this will form the basis for the top layer of the pillar. Once it is all dry, lay the top bricks over the surface, using mortar to fill in any gaps. After the top layer is finished, all that is left to do is to allow it to dry for a few days.

Once your pillar is completed and has dried, it will be strong and attractive addition to your driveway. With the pillar in place, you are now ready to install a driveway gate or even just enjoy the beautiful entrance feature. Constructing a pillar for your driveway is a labor-intensive project, but it is not particularly complicated. Just be sure to carefully measure and cut the bricks, mix the mortar and concrete properly, and have a little patience. Follow the steps above and you will have a durable and attractive pillar for your driveway.
Making a beautiful pillar for your driveway can be a great way to add an attractive entrance feature to your estate. The process of making a pillar for your driveway is labor-intensive and will take some time, but it is not especially difficult—just follow the steps below to create a sturdy pillar to mark the entrance to your home.

To start building the pillar, begin by creating the base. Spread some concrete mix in a wheelbarrow, and then use a shovel to lift it out onto the ground. Lay the concrete and then place a steel bar in an L-shape into the concrete, leaving the longest end sticking up. Use a trowel to smooth out the concrete and then let it dry for 1 to 2 days.

Now that the base is ready, you can begin laying the bricks in order to form the pillar. Start by using a trowel to spread the mortar in between each brick. As you lay the layers of bricks, use a level to check that they are aligned correctly. With every layer of bricks, use concrete to fill in the gap between the bricks and the steel bar. This will reinforce the pillar and create a sturdy structure.

Continue stretching the pillar upwards by placing more bricks and mortaring them in. At the height you want your pillar to be, let the entire structure dry for 1 to 2 days, allowing the concrete and mortar to fully set. Then, if needed for a more finished look, you can put bricks over the top of the pillar, filling in the gaps with more mortar. When done, it should be a beautiful and impressive entrance to your estate.

Finally, make sure to cover the pillar with waterproof sealer to ensure that rain and harsh weather don’t corrode the bricks. Left unprotected, the mortar could eventually erode, and you don’t want the pillar to be unstable. So, after all your hard work constructing the pillar, make sure to do one final step and cover it with waterproof sealer.

Making a pillar for your driveway can take some considerable effort, but when it is all said and done you will be left with a beautiful entrance feature. Take your time, measure twice and cut once, and prepare for a long, but rewarding journey. With a little patience and focus, you, too, can make a pillar for your driveway.