Installing beadboard panels can bring a unique look to any room. Cutting beadboard panels for installation, however, is not the same as cutting most other types of wood. To get optimal results when installing beadboard panels, you need to take extra care when cutting the panels. Here are a few tips for cutting beadboard panels that can help ensure that you get a professional looking result.
First, make sure you are using the right kind of saw blade specifically designed for cutting beadboard panels. A good rule of thumb is to use a sharpened 60 to 80 tooth carbide tipped saw blade. This type of saw blade minimizes chances of chipping and splintering the edges of the panels when making the cut. You may also want to consider using a table saw as this will allow you make the most precise cut possible.
When you are ready to make the panel cuts, be sure to position the panels with their backside facing up. This will make any possible splintering or tearing of the panels visible only on the back side, and not on any visible side of the installed beadboard.
In order to make sure you achieve optimal results when cutting the beadboard panels, you should always measure your dimensions carefully and mark them on the panels before making any cuts. This will allow you to avoid any problems when joining two pieces of the beadboard panels together by having an exact fit.
Finally, you should use clamps to properly secure the beadboard panels in place before making the cut. This will ensure that the panel won’t move or shift during the cutting process, resulting in a more accurate cut.
These are just a few tips for cutting beadboard panels correctly. If you follow these steps, you can be sure that you will get a professional looking result that will last for years to come.
