A Comprehensive Guide to Installing Porcelain Tile on Concrete Floors
Installing porcelain tile on concrete is an easy process if you follow the correct steps. Porcelain tile is an attractive and durable option for many different types of locations in your home, but it does require some careful preparation before you begin. To ensure that your installation is a success, you will need to take the time to prep the area and make all the necessary measurements before you start laying the tile.
Begin by measuring the room and snapping chalk lines to determine where the center point of each wall is. Mark the center of the room on the floor, and then start laying the tile in the corner at the intersection of the two lines. Make sure to use tile spacers to make sure the tiles are spaced evenly, and try to keep the same grout line width all the way around the room. You can then move forward and start laying the tiles up against the wall.
To cut the porcelain tile and make it fit against the wall, measure the space you have to fill and make a mark on the back of the tile with a wax pencil or a marker. Then, use a wet saw to make the appropriate cut. Place the cut piece into the adhesive, using tile spacers as necessary, and continue laying the tiles until you complete the room.
Once all the tiles are laid, allow for a 24-hour period for the adhesive to properly set and cure. Then, apply the grout to the grout joints and use a sponge to clean away any excess grout that is left on top of the tiles. Finally, apply a tile sealer to the tiles to protect them and help them last longer. By following these steps, you should be able to successfully install porcelain tile on concrete in any room in your home.