10 Simple Steps to Rust-Proof Your Vehicle and Protect Your Investment

Rust-proofing your car is an important procedure for protecting your investment. It does not take too much effort to protect the metal parts of your car, thereby keeping it looking new and avoiding any potential damage which can occur due to rusting. While it is a good idea to do so regularly, here are 10 steps to follow when rust-proofing your car:

Step 1: Inspect the car regularly and immediately repair any scrapes or nicks that you find. Early detection is key to avoiding corrosion, as rust is more likely to form in areas where the paint has been worn off.

Step 2: Remove any rust that has already formed by using a medium-grit sandpaper. Wrap the sandpaper around a screwdriver if there are any tight spots.

Step 3: After the rust has been removed, clean the surface by using a damp rag and mineral spirits to remove any grease or oil.

Step 4: After you have completed the cleaning process, it is time to apply touch-up paint on the rusty spots. Use a computer match or have a paint technician analyze a paint sample to get the exact paint that matches your car’s original.

Step 5: It is important to take extra precaution when rust-proofing cars which are kept outside – like cars parked in the driveway or in a garage. Check the car for any scrapes or nicks, paying particular attention to the wheel wells and the undercarriage.

Step 6: Get a spray gun and an air compressor from a rental store if you do not have your own. This will be useful in getting to hard-to-reach corners.

Step 7: Clean the car before you start applying rust proofing fluid. Use a wire brush to scrub off any dirt and road grime, taking special care with the wheel wells and the undercarriage.

Step 8: Once the surface is clean, start spraying the rust proofing fluid in all the necessary areas. Note that you should take extra care to not spray on any plastic parts of the car.

Step 9: Continue until all the needed parts are sprayed and make sure to wipe off any excess fluid.

Step 10: Lastly, keep the fluid away from any sources of heat or ignition as the fluid contains flammable solvent vapors.

By following these steps, you are ensuring that your car remains rust-free and safe to use. Treat your car to regular rust-proofing to keep it in the best shape and to avoid further damage.